Yongnuo supersync Pc#

Note: The PC port is for output using only.Yongnuo YN-622-TX E-TTL / i-TTL LCD Wireless Flash Trigger

trigger voltage is less than 300 Voltage. You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash to realize higher syc and then you can use them together in HSS. Manua and Multi output need to be set on the flash speedlite.Į), Work with Strobe Studio flash light in HSS function Note: Only FEC FVLRatio and Shutter sync can be set in the camera side.

Yongnuo supersync manual#

With this function, you can trigger remote speedlites in different modes, set up one YN-622N transceiver on hot shoe of flash in TTL mode, set up the second YN-622N transceiver on hot shoe of flash in manual mode, and the third YN-622N transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly. speed is just 1/250s or less, different cameras have different Sync speed. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. Note: Speedlites on hot-shoe of transmitter support i-TTL/ Manual / RPT

Yongnuo supersync full#

It supports FEC, FVL, High-speed Sync, Front Curtain, Rear Curtain, Modeling flash, i-TTL, Manual/RPT, Manual mode, Auto Zooming, AF Lamp.Ī), Support Full I-TTL Pass-through function when on cameraġ), Mount one YN-622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or RPT mode.Ģ), Mount flash on hot shoe of YN-622N transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or RPT mode.

Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, i-TTL, Manual and RPT, and it can fire flashes at 360 degree direction, the operating range is 100 metres. Yongnuo First Wireless i-TTL Flash Trigger YN-622N is Released now, it's designed for Nikon Camera. *The above functions need to be used with the YN-622N transceiver.Support the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (non Nikon body).The flash sync signal can be input through the PC port.Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows.Support simulate (modeling) flash, red-eye reduction flash.Support exposure compensation, flash value lock function(FVL).Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s.The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately.Supporting mixed use of the A/B/C three groups of flashes with i-TTL, Manual flash, or Super sync flash mode.Grouping flash mode: i-TTL/Manual flash/Super sync.Equipped with the AF focus assist light (can be disabled).The focal length(zoom)of the A/B/C three groups of flash can be adjusted separately.Support wireless shutter release function.The firmware can be upgraded through the USB interface.LCD screen display, multi-buttons quick operation.In addition, it supports setting different focal length(zoom)of the three groups of flash, the remote-controlled distance can reach 100M, supporting seven wireless channels and A/B/C three groups, and equipped with the AF-assist beam emitter. This product adopts flexible LCD menu control, supporting mixed use of the A/B/C three groups of flashes using i-TTL, manual, or super sync flash mode, can be adjusted the exposure compensation or flash output of each group.